Matte Water Based Varnish

Matte water based varnish Product Description:

Matte water based varnish can be bronzed. The gloss of water-based matte oil is about 15-30 degrees. It has matte, bronzing and friction resistance. The powder does not stick to the rubber roller in the polishing process, and has good anti viscosity and moisture resistance after polishing, and has good printing ink tightness. Environmentally friendly and non-toxic, easy to clean when polishing.

Drying temperature: 60-100 ° C

Drying speed: 60-80m / min

Diluent: water

Performance features: matte, bronzing, wear resistance, wet adhesion resistance

Scope of application: electronic, cosmetic and other packaging boxes, instructions, tags, etc

Matte water based varnish polishing method:

1. Flat offset printing, coating and polishing unit (cavity scraper or double roll type)

2. Drying: infrared or hot air

3. Offline glazing

Matte water based varnish storage:

1. Avoid frost, heat and direct sunlight;

2. The minimum storage period is 12 months;

3. It can be stored in the original packaging for 30 ~ 5°;

4. After opening the barrel, it should be used up as soon as possible;

5. If the varnish is stored improperly or for a long time, it may cause the viscosity to rise. Check the viscosity before starting the machine and adjust it with water if necessary.

Precautions for matte water based varnish:

1. Avoid mixing with other varnish or cleaning water;

2. It is recommended to use solvent resistant, alkali resistant and alcohol resistant ink for printing;

3. The equipment can be cleaned with water, and the dry varnish can be cleaned with alcohol.

Matte water based varnish has good surface brushing performance. It is suitable for polishing equipment of coater, flexographic machine and offset printing machine. The surface of its polishing products is plump and smooth. And it has good water resistance (after complete drying).

Matte water based varnish is a kind of water-based environmental protection online matte oil, which has excellent matte, good wear resistance, good transparency, fast drying and good printing suitability. It has good wettability and leveling for wet press wet and wet press dry printing, and the printing machine is easy to clean. Water based matte oil meets the national and EU environmental protection standards and passes the EU ROHS inspection. It is suitable for high-end packaging such as food packaging, footwear, electronics and appliances, medicine, tobacco and alcohol. This varnish is used for online polishing and offline polishing.

Other Instructions

Application: when using on-line glazing, try to use 80 ~ 120 wire anilox roller. The hand feeling and surface covering effect of printing twice will be better, and the speed of the printing machine will be controlled at 7000-8000 sheets per hour. The 80 line anilox roller printing line has a strong sense of fluff, the layout is relatively complete and unified, and the 120 line printing layout is relatively fine and smooth.

Safety: very good, can't burn

Matters needing attention

1. During storage, the end of the barrel shall be properly covered to prevent moisture volatilization, resulting in viscosity rise or skinning.

2. It must be stirred evenly before use. Please do not mix it with other products. Unused products need to be sealed and stored. Zhongzhixing matte water based varnish environmental protection water-based oil Ink drying speed is fast and weather resistance is strong.

3. This information is reliable. Rehe guarantee is not provided. Please confirm the method and effect before use. If you have any other questions, please contact our technical department.

Hot Tags: matte water based varnish, China matte water based varnish manufacturers, suppliers, water based urethane varnish, water based varnish waterproof, clear water based varnish for wood, water based marine spar varnish, extra strong varnish, water based clear satin varnish